Feature:
EFR-N150 power supply / power source for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and applicable to two signals-high and low level. TTL level is to control the laser on/off, in the meantime, the power supply / power source has an anomalistic protective switch to check whether the outer water and air, etc. are free or not. Adjust the laser power: Input imitative signal, from 0 to 5V, or input PWM signal to control the output laser power Ageing test before leaving the factory: Each power supply / power source before sold will go through the ageing tests, which is made at temperature 65°C with full-load condition and sustains 10 hours, is turned on/off 300 times within 7 seconds Main features of EFR Power Supply:
• Excellent compatibility.
• Extending the lifespan of the laser tube.
• Power supply / power source has a feedback port, which can be used for closed-loop control and also for checking the laser tubes operating current.
• Power supply / power source itself has a protection while in open-circuit state: Under the outer shell of the power is well connected with the ground, the power supply / power source can be used in open-circuit state within a short time so as to avoid damaging the power supply / power source when the laser tube leaks.
Furthermore, the power supply s working lifespan will be prolonged.
We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.
Free shipping on orders over $79.
$6 shipping charge on orders under $79.