Cleaning and Maintenance Tip (1)

Every large format printers needs periodical maintenance in order to keep in in a good functioning state. We need cleaning and lubricating products .

Cleaning wipes are dustfree, high quality polyester wipes specially designed for cleaning delicate printer parts such as print heads. This textile cloth doesn’t leave any dust or fibers on the cleaned surface. Some printer manufacturers advise to use swabs instead of wipes. Always follow this advise.

PREPARATION:

1. Wear cleanroom gloves. For hazardous solvents, wear two pairs of gloves and try to keep the gloves free of the solvent liquid. Wear the appropriate personal protection equipment according to the manufacturers protocols for the solvent.

2. Moisten the wipe with an appropriate cleaning solvent

3. Fold a wipe in mid-air into quarter folds.

WIPING:

1. Hold the wipe so that its loose edges are grouped between the thumb and the forefinger. Keep the loose edges lifted away from the surface to be wiped.

2. Apply even surface contact by holding fingers together and applying pressure to the wiper. The hand will be at a slight angle, allowing the folded edges to touch the area to be wiped.

3. Wipe in one direction

4. Always use the cleanest surface of the wiper. If re-wiping a surface, use a new, clean portion of the wipe.

5. When wiping print head nozzle plates, use the folded edge of the wipe and apply gentle pressure.

Ink solution and Cleaning Swab(Click picture to buy)

 


 

Get in Touch

9850 6th St Rancho Cucamonga CA 91730

626-342-7605

service@sign-in-global.us

Newsletter

Subscribe to our special offers

Follow us

Follow us on Facebook Follow us on Youtobe
Back to top