Silica Gel Pinch Roller Wheel for Redsail Vinyl Cutter
• Width: 12mm
• Hole diameter: 3mm
• Outer diameter: 16mm
• Covered with new rubber.
• With a new bearing inside the roller.
• Please measure your old pinch roller before you purchase.
To be used with: Redsail vinyl cutter RS360C, RS450C, RS500C, RS720C, RS800C, RS1120C, RS1360C, CRS1600C, RS1780C
Note: Black and transparent colors are shipped randomly
Details:
Application:
Maintenance of silica gel pinch roller wheel:
• The silica gel pinch roller wheel should be cleaned frequently, and just wipe with damp cloth is ok. If there are too much glue on the wheel-face, you can use cotton dipped alcohol to wipe.
• Don't arbitrarily adjust the pressure if without pressure gauge, uneven pressure may causing deviate mistake.
• If the deviating of paper is become worse, and cleaning is useless, you may need to replace your old roller.Please replace all old rollers at same time, the different friction coefficient of new and old roller will cause the deviating of paper.
We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.
Free shipping on orders over $79.
$6 shipping charge on orders under $79.