Reci W6 / W8 / S6 / S8 130 - 180W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

Item Code: CS-PS-DY20-220V

Unit Price: $319.00/set

Apply to See Distributor Price

Inquire Now

Buyer Protection

Related products
Reci W6 / W8 / S6 / S8 130 - 180W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
Buy It Now


Mark & model: 
DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube.
Original: Asia and Pacific Area China
Quality standard: International
H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts.

Warm tips:
The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order.


Features:

This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube.
The power sourcesupply makes laser tube output larger and more stable.
Quick Response: It can enlarge laser power and prolong laser tube‘s service life.
Easy Control: The start and stop of laser can be easily controlled by TTL level.
This power supply / power source has output open circuit protection.
This power supply / power source has TTL signal indication, water through signal indication and laser output indication.
This power supply / power source has the BUTTON to test it work properly.
Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc
We stick the protection film on the power source to prevent the metal parts of the scrape!







 
 
I. Instruction for sub - connection wire of the control end
 
1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 
2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 
3) Footer 5 G refers to ground and 6 refers to input end. 
4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5.
5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K.
6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 
7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection.
8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser.
9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 
10) The ammeter is concatenated to the cathode line.  

II. Instruction for power wire
Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. 

III. Instruction for laser connection wire 
1) The positive red - line with high voltage is connected to the laser tail
2) The negative white - line is connected to laser output window

IV. Current limitation
To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery.

V. Linear scale between input signal and the output current
Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA.
Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. 
 
VI. Using current
The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation.


Quality Report:
 

We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.

 

Free shipping on orders over $79.
$6 shipping charge on orders under $79.

Item   CS-PS-DY20-220
Input Input Voltage AC220V (The order should be especially instructions )
  AC Frequency 47 - 440Hz
  Max Input Power 1000W
  Max Input current 10A
Output Max output Voltage 50KV
  Max Output current 35mA
Efficiency equal or more than 90% ( load down )
Time no-failure equal or more than10000h
Response speed

equal  or less than 1mS (the time from output of switch signal to 90%
of initial setting current )

Voltage - resisting Input - Output ,input - machine hull: C1500V 10mA 60s; output cathode and machine hull connection
Usage environment Work temperature (-10 ~ 40) , Relative humidity: Equal or  less than 90%
Cooling Type The compulsive air cooling

Wooden Box: There is total one carton box.
 

Power Source Size
12" x 8" x 3.1" (312mm x 205mm x 80mm)
Power Source Weight
6.9lb (3.14kg)
Package
Carton box
Packing Size
16" x 11" x 6.5" (410mm x 280mm x 165mm)
Gross Weight
12.1lb (5.5kg)

Packing List:
Laser power source   1 set

Package:

 



CS-LP-DY20 laser tube power supply



Instruction for DY20
 

Quality Assurance

1. The warranty period for the first buyer is 12 months.
2. The quality assurance is invalidated to the special offered products or customized products.
3. Power supply must working under regulated current, otherwise the power supply will not be guaranteed by manufacturer.
4. The returned Z - Series products must meet the following qualifications: 
1) The appearance, structure and certificate are in good condition.
2) The power supply doesn't be impacted or pressed by external force.
 
Comprehensive guarantee for one year except the wearing parts
24 - hour technical support by email or calling
User - friendly English manual for machine using and maintaining

Spare Parts Supports
We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF format on how to replace the parts to you.
If you want to buy any parts from us, please tell us the names or pictures of the parts.

Satisfaction Guarantee
For the items other than consumable products sold via www.Sign-in-China.com, we provide 12 months warranty after shipment. All the extra parts for equipment can be purchased from www.Sign-in-China.com. Further, for our VIP customers, the period of warranty shall be extended to 18 months.

We offer 14 days 100% satisfaction guarantee on all our machines. If you are not satisfied after receiving an item, Sign-in-China.com promises that, within 14 days after actual delivery of such an item, you are allowed to return the item to us and get complete refund, provided the returned item does not affect its subsequent re - selling and you also undertake the charge of returning delivery.
 

More information, please look at the document of Training & Warranty & Service Policies.  

   

Training & Warranty & Service Policies

Customer Reviews
Love it! Rate it!
  • Simply write a review of a product and you can get up to 500 Points (Equivalent to $5) for Next Orders.
  • ≥ 120 words + ≥ 3 clear photos = Up to 1000 Points (Equivalent to $10).
  • Show us why you love or how to use the product. Help other shoppers find the right product!
Average Rating: 0
  • Reviews (0)
  • No Reviews

Quick Inquiry for Reci W6 / W8 / S6 / S8 130 - 180W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

Business E-mail:

Name:

Phone:

Message:

Characters:20(Min.) - 2000(Max.)

Verification code:

Top Selling

Get in Touch

9850 6th St Rancho Cucamonga CA 91730

626-342-7605

service@sign-in-global.us

Newsletter

Subscribe to our special offers

Follow us

Follow us on Facebook Follow us on Youtobe
Back to top