Description:
MPC6565 is designed for the open-loop motion control system for the laser machine only. It is upgraded from MPC6535. Based on DSP and FPGA technology, the advanced velocity look-ahead and trajectory blending algorithm ensure the velocity invariableness and transition smoothness between any two-trajectory segments during the high speed X-Y continuous trajectory motion. And therefore the perfect smoothness and precision of the machining can be easily achieved.
Applications:
Over 10-year experience in CO2 (analog command) or RF (PWM command) tube compatible laser machine exclusively, open-loop motion control system:
Features:
Both servo and stepper motor supported
Break-point resume
Pulse frequency up to 2MHz
Compatible for stepper motors or digital servo motors
RS232 ModBus Protocol
Data transferred by USB cable or USB flash drive
1-CH laser power on/off control output
1-CH laser PWM control output
Up to 2-CH independent power analog output
PWM preheat control
Uncapping protection
Flying-optics compensation
Laser Control Functionality
Motion Control
High precision interpolation, circular interpolation resolution under 0.5 pulse
For CO2 tube
Laser ON, TTL compatible
Laser power control: PWM, frequency or analog voltage (user select)
For RF tube
Laser ON, TTL compatible
Q pulse signal, programmable duty and frequency
Software Environment
Windows 2000/XP/VISTA/7/8/8.1/10 (32 and 64-bit) Windows
Bundled with application software, LaserCut5.3 or 6.0
Working Environment
Temperature: 0-60 Celsius degree
Humidity: 5-90%, non condensing
Power
24VDC, 2A
The Connection Pin Definition
A Typical Control System with MPC6565
We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.
Free shipping on orders over $79.
$6 shipping charge on orders under $79.
Package list:
Controller+control panel+dongle key+USB cable+wire cable