New customer? Start here
Forgot your password? Recover password
Your cart is empty.
Apply to See Distributor Price
Get Coupon: $5Order ≥ $100 $15Order ≥ $300 $25Order ≥ $500 $50Order ≥ $1000
$1,617.00/set
Help us continuously improve by reporting any errors on this page!
If any information is incorrect or conflicting, let us know here. All reports are reviewed within 48 hours (Mon-Fri).
123top.com appreciates each feedback from customers, your opinion will play an important role in the website construction.
$1,617.00/set
Is this product being sold elsewhere for a lower price?
Please fill in the short form below and we will try to work with our suppliers to match their price or provide an even better deal.
Price match requests are handled by professional sourcing staffs.
If the reported product is identical to the product from Sign-in-Global.us, and lower priced sources are found, prices on product pages will be updated within 48 hours (Mon-Fri) after price match is received.
Could not find the commodity information you want to buy on the website?
Let us know and we will make a deal of it.
All requests are reviewed within 48 hours (Mon-Fri).
The actual process of sourcing for the product might take longer. We can not necessarily always find you need products, but all your needs will be valued.
Add successfully!
CNCR-CP-Y series engraving machine, is released for the sign advertising industry with a high performance / cost ratio. It has a new look, fast speed and high precision. It comes with DSC control system, HD LCD screen, and friendly interface. Double Y axis engraving machine, the latest model, is accurate as screw machines and fast as rack and pinion engraving machines.
Main Configuration Information:
Engraving Area: 650mm x 900mm(25.6"x35")
Height of Gantry Lifting: 110mm (4.3")
Maximum Travel Speed: 7200mm (283") / min
Spindle: 1.5KW Chinese air cooled
10 pcs engraving tools
Aluminum alloy working table, circular guideway, Leadshine drivers
3.5" DSC-931 Color screen controller, double Y axis, stepper motor
 |
 |
| 3.5 DSC-931 Color screen controller With digital-to-analog conversion technology and DSC control system, data processing is much faster. |
There is USB 2.0 and Ethernet port, also large flash memory inside. Document transmission and download will be easy with them. |
 |
 |
| Remote control handle | Chinese air cooled spindle, 24000rpm rate |
 |
 |
| Double Y axis, double driving engraving machine, is accurate as screw machines and fast as rack and pinion engraving machines. | Tool sensor is guaranteed working accuracy and engraving quality. |
 |
|
| Electrical cabinet adopts high quality accessories, long using life. | |
• This series engraving machine has “Cutting at angle” function with DSC control system. “Cutting at angle” can make less chance of work piece coming loose and no trace marks. (When the tool comes to the corner, but not to the bottom, workpiese come loose quite often). More details of “Cutting at angle” function operation, please see software manual.
Applications
Billboards, dual color ABS boards, miniature models, Plexiglas, wood articles, etc.
Instruction
Tool sensor is guaranteed working accuracy and engraving quality.
First confirm 0 point of engraving file (make center of engraving material as 0 point or the lower right corner as 0 point), and then decide how to put the engraving material on the working table. Next fix the engraving material up and put sensor on the it, then move X, Y, Z axis by keyboard or remote to sensor, once touched, the tool will rise automatically, at the same time the machine will remember the height as default to keep precision of process. (More details please check the manual of machine control software)
The nut and the clamp are used to fixing cutting tools on the spindle. The diameter of cutting tools should be corresponding to clamp s diameter. The clamps have Φ3.175, Φ4, Φ6, Φ8 models, except for special cutting tools.
Installation of tool
Engraving material clamping
Different tools have different engraving effect.
Drilling tool: Mainly used for carving characters, tiny material
Milling tool: Mainly used for face milling, cutting and rough processing
Knurling tool: Mainly used for special shape processing, like 3D modeling character, and special texture.
Remark: Here just some types for reference, others are based on actual items.
The machine must be installed on a flat ground. Pay attention to following tips:
• Working temperature environment 0-40℃
• Working humidity 30-75%
• Power voltage 220V + / - 10%
• Machine ground wire must be installed properly to avoid short circuit and / or damage.
• Machine should be installed in a roomy environment with plenty of space. It should not be installed near other machine, which may cause interference. The machine may not work correctly in such instances.
• Machine should be stable on all legs.
Make sure there is enough room around the machine, especially around the gantry and the controller.
1. Machine Installation - Main parts installation
Includes: Z axis parts installation, controller installation, spindle installation, connection of all cable, and tool sensor installation, etc
More information, please refer to the User Manual.
2. Engraving Software installation, edit the image you want to process
3. Fix the workpieces onto the working table, start to process
4. Finishing work!
Product Highlights
• It can work offline. New look, fast speed and high precision
• It uses a high speed USB 2.0 connector and can transfer at speeds up to 12MB / second.
• There is an Ethernet connector and a large internal memory, making it easy to download data.
• The new digital analog converter makes it much easier to change the speed of the spindle via the controller. The controller uses DSC technology, enhancing data processing speed.
• When the job mixes straight lines and arcs, it will make the output very smooth.
• The new controller has the same previous functions such as cutting at an angle for smoother cuts, power failure memory of the last point, restarting the job at any line, etc.
• The system has many advanced functions like ramp entry, power-off memory, restarting at any line. And also many processing modes like professional modes including Constant speed cutting, 2D mode, 3D mode, Duplicate Mode, Mirror Image Mode, Scanning Mode Drilling Mode and custom mode.
Quality report:
We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.
| Model | CNCR-CP-6590-DDP |
| Precision Repeatability | ±0.02mm |
| Maximum Engraving Area |
650mm x 900mm (25.6" x 35") |
| Spindle Power | 1.5 KW Chinese air cooled |
| Spindle Rate | 24000r/min |
| Cutting Tool Diameter | Ø3.175, Ø4, Ø6, Ø8 |
| Travel of Z Axis | 110mm (4.3") |
| Maximum Movement Speed | 7200mm (283") / min |
| Working Table Size (X, Y) | 720mm x 1270mm (28" x 50") |
| Voltage | AC220V ± 10%, 50Hz |
| Consumption | 2.5KW |
| Engraving Software | Ucancam V10, Type3, Router 8, and Type3, etc.(Optional) |
| Interface | USB / Ethernet |
| Type Of Worktable | Aluminum slot |
Terms & Condition of Purchase: After we receive PO from customer with stamp, we give PI for customer.
Wooden Box: There is total one wooden box or pallet.
CNCR-CP-6590
|
Machine Dimension
|
1120mm x 1520mm x 1400mm (44" x 60" x 55")
|
|
|
Machine Weight
|
44lb (200kg)
|
|
| Package | Wooden box, Fumigation free package | |
| Packing Size | 1590mm x 1350mm x 1650mm (63" x 53" x 65") | |
| Gross Weight | 616lb (280kg) | |
Main Parts List
Z axis parts
pictures
Description
Screw and Plug Size
Type of Screw and Plug
Quantity
Spindle Holder
M6X25
Hexagon screw
4
Spindle
M6X25
Hexagon screw
4
Spindle Dust Cover
M5X10
Round head stainless steel screw
4
Spindle Power Cable
7 pin
Male type plug (Positive)
1
Fixed Plate for the Tank Chain
M4X10
Round head stainless steel screw
1
Controller parts
Controller
M4X15
Round head stainless steel screw
4
Single Cable
26 pin
Male type plug (Positive)
1
Power Cable
12 pin
Female type plug (Negative)
1
Controller accessories
Controller Support Beam
M10X65
Hexagon screw
1
CD
26 pin
1
Ethernet Cable
1.5 - 3m
RJ-45
1
Toolbox list
Each machine will have its own toolbox list located in the machine. The list may not have the same parts listed below as each machine has different tools.
| Description | Specification | Quantity | Remark | |
| Toolbox | 13" | 1 | ||
| Clamps | ER16, Ø3.175mm | 1 | Installed on the spindle | |
| Clamping nuts | ER16 | 1 | Installed on the spindle | |
| Clamps | ER16, Ø6mm | 1 | ||
| Single - head open - end wrenches | H25 | 1 | ||
| Double-head open-end wrenches | 22-24 | 1 | ||
| Inner hexagon wrenches | 5mm | 1 | ||
| Flat tip screw drivers | 6 x 100 | 1 | ||
| Cross tip screw drivers | 6 x 100 | 1 | ||
| Flat bottom engraving bits | 3.175 x 20 x 0.2 x 33 | 1 | ||
| Flat bottom engraving bits | 3.175 x 20 x 0.3 x 33 | 1 | ||
| Flat bottom engraving bits | 3.175 x 30 x 0.2 x 33 | 2 | ||
| Flat bottom engraving bits | 3.175 x 30 x 0.3 x 33 | 1 | ||
| Half straight bits | 3.175 x 1.0 x 3 x 33 | 1 | ||
| Half straight bits | 3.175 x 2.0 x 6 x 33 | 1 | ||
| Two spiral flute bits | 3.175 x 12 x 38 | 1 | ||
| Two spiral flute bits | 3.175 x 22 x 45 | 1 | ||
| One spiral flute bits for acrylic | 3.175 x 12 x 38 | 1 | ||
| Workpiece pressing plates | 1# | 6 | Ø8 nut, washer, T screw 8 x 45, flat pressing plate | |
| Paint brushes | 2" | 1 | ||
| Controller keys | 2 | |||
Note: There may have some changes to the toolbox list because of updates. Please consult your toolbox list for the tools included in your toolbox.
Package:
CNCR-CP Series cnc Router:
Average Rating: 0 
