Product description:
Using high-quality 0.2W 2835 light source, which has the characteristics of high brightness, light angle, light color uniformity, antistatic ability strong, using lens + epoxy waterproof technology, maximum improve product levels of IP and also meet the customers of large angle products demand, physical and electrical design, ensure the service life of up to 2 years, one end of the power supply, the brightness of the fore and aft consistent, no color difference; safety, energy saving, environmental protection, and is widely used in advertisement logo, advertising words and lighting.
Product installation and usage:
(A). In the process of installation, a sharp object should be avoided to touch the surface of the product so as to avoid damaging the lens, which may affect the light emitting effect.
(B). The usage of DC12V constant voltage switching power supply of this product, according to the number of connected LED module to select the right power of the power supply, the product is not apply to the voltage of 220V, otherwise the product will be burned.
(c). On led module connected with the total power should not exceed 80% of the rated power driven, otherwise easy to burn, also according to the actual series connected module number selection of suitable thickness of the main line, between the line and the line connecting points must insulating glue tightly wrapped, in order to ensure the safe use of this product!
Products comply with UL certification standards, more energy saving, higher brightness, more stable.
Specification:
Size(mm) |
27*17*8 |
Description |
Constant curent with lens, white color, 30 pcs/string |
LED Type&Qty |
Sanan 2835 |
Voltage |
12 |
Power
(W) |
0.36W |
Lumen
(LM) |
31-35 |
Central distance (mm) |
85 |
Wire |
UL1007 AWG20
L=70mm |
Cut |
Each 1pcs |
Application |
6-12cm depth channel letters |
View angle |
160° |
Parameters of product:
Voltage |
DC12V |
Material of shell |
ABS |
Current (mA) |
30 |
Color of the shell |
white |
Power (W) |
0.36 |
Connecting cables |
UL1007 20# |
Emitting angle |
160° |
Color of connecting cable |
Positive: red
Negative: white
|
Luminous (lm) |
35 |
Cascade quantity(pcs) |
30 |
Lighting Dimension(mm) |
27*18*8 |
Fix screw |
M3 |
LED Qty(pcs) |
1 |
Back glue |
3M |
Emitting color |
Red/white |
Operating temperature |
-40~60℃ |
IP rate |
IP65 |
Storage temperature |
-40~80℃ |
IP type |
Injection+lens |
Warranty |
5years |
Remarks of installation and application:
(A). Don`t stick the surface of the light by sharp tools.
(B). Don`t fix this product by sour glass glue or other soured adhesion;don`t operate or store this product in sour environment or the light will be vulcanized and the life span of the product will be reduced.
(C).Drive this product by 12V DC switch power supply, and the power should be suitable for the quantity of the led modules; do not connect this product to the utility directly, or the product will be burnt up.
(D). The total power of the led modules in series should be lower than 80% of the power of the driver, or the power supply will be burnt up probably,select the suitable thickness of the connecting cable according to the quantity of modules, and the connecting points should be wrapped by electrical tape.
(E). The maximum cascade quantity of this product is 20 pieces for one strip, and the brightness of the two ends will be different because of the voltage loss when you increase the quantity of the module.
Free shipping on orders over $79.
$6 shipping charge on orders under $79.
We free ship only to the 48 contiguous states.
For Hawaii, Alaska, Guahan or Puerto Ricoa Customers, an extra freight is required.