1800W New Flash Dryer Silkscreen T shirt Printing Curing Adjustable Height
Specification:
Voltage: 110V
Drying Size: 60 x 45cm(24" x 18")
Power: 1800W
Attention:
The new heating tubes have oil,the oil burning comes with smoke and burnin smell.It is normal!!! After the oil burning out ,the burning and smoking will disappear!
Usage:
1.After well installed, connect the power supply.
2.Turn on the switch and then it will work automatically.
3.Put the probe of the thermometer on the drying table, heat for some time (20 minutes in reference), and then check the actual temp. If the temp is too low or too high, just risen or lower the height of the drying box.
Detail:
Feature:
1.Under the condition of indoor temp. is 24C(75F), and no ventilation:
(1)The temp. 3cm under the heating tubes:
a. When all the six tubes are on, it is 240C(464F);(it is not recommended)
b. When the four tubes are on(each 2 in both sides and middle),it is170C(338F);(it is recommended)
(2)The temp. 5cm under the heating tubes:
a. When all the six tubes are on, it is 260C(500F);(it is not recommended)
b. When the four tubes are on(each 2 in both sides and middle),it is190C(374F);(it is recommended)
Application:
Flash dryer gives you a full larger curing capacity as well as a possible quicker flash time between colors. It can easily cure ink for silkscreen printing, can be used to flash dry your prints, and process the final curing of your garments. The flash dryer base is compact, and will not tip over if bumped. Stop curing shirts with a heat gun or an oven get this flash dryer and start drying your products the right way
Package: