CALCA 25 Pack 20 OZ Pearl Pink Sublimation Straight Tumbler Blanks, Double 304 Stainless Steel, Engraving, Silk Screen Printing Tumbler Blanks With Straw and Flip Lid
DIY: The surface of the cup can be designed according to your preferences, sublimation, laser engraving, embossed logo, silkscreen printing, etc.
Design for all kinds of hot and cold beverages, our 20 Oz capacity wine tumbler is suitable for any indoor or outdoor places. Fit for enjoying drinks at home, on the beach, by the lake, at the pool, in the office, at the party, cabin trip, camping etc.
The Large Capacity design allows you to enjoy a delicious drink at home or outdoor.
You can add your unique designs on the surface. It is great to hold wine, champagne, water, iced teas and juices for swimming, sports, travel, barbecue, camping, party, etc.
Material: Inner & Outer are both 304-18/8 food grade stainless steel
Surface Finishing: Spray paint + sublimation coating
Color: Pearl Pink
Capacity: 20Oz (590ml)
Lid material: AS
Tumbler Size: 20.8cm x 7.3cm x 6.5cm (8.2in x 2.8in x 2.6in)
Stainless Steel Straw Size: 24cm (9.45in)
Hot / Cold: Hot & Cold
Fits Cupholders: Yes
Reduces Condensation: Yes
Quantity: 25pcs /carton
Weight: 10kgs (22lbs) /carton
Dimension: 42 x 42 x 25.5cm (16.5" x 6.7" x 10" ) /carton
Manual measurement, please allow slight errors on size.
The color may exist slight difference due to different screen display.
1 x 304 Stainless Steel Tumbler
1 x Stainless Steel Straw
1 x ABS Lid
1 pc tumbler packed into 1 white box
Without Rubber Coaster
Built of premium 304 food-grade stainless steel inside and outside to be tough enough to resist dents and rust.
1. Vacuum insulated
This tumbler is double wall insulated with thermal design which will keep your drink cold for 8 hours or hot for 4 hours.This insulation will protect your hands from the beverages hot or cold temperature.
2. 18/8 304 stainless steel
Travel mugs are made of 304 stainless steel. Electro polished inside.
which means this FDA approved tumbler will never rust or leave a bad metal taste in your mouth.
3. BPA Free Lid
The lid is made of AS, chemical-free.it comes with a removable rubber gasket. Wide mouth design and Drink hole on the top for easy washing.
4. Fits most cup holders
The shape of it will fit normal sized cup holders.
5. Suitable occasions
The tumbler can be used as a travel mug, coffee cup, auto cup, beer canister or tea cup, etc.
Note: Be sure to remove lid before sublimating!
Mug Press Machine Settings
Press Temperature: 180℃ (356℉)
Time: 150 - 165 Seconds
Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
Place tumbler in press at the press temperature, and close the element around the tumbler
Press for the specified time above needed using specified pressure
If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
Once done, remove the tumbler from the press and remove the transfer paper immediately
Allow the tumbler to cool completely before use
1.It is normal for the machine to have gaps, so that there will be pressure.
2.The taperless tumbler can do the full print. We suggest change the position of tumbler and press again to avoid bad print. Please refer to the video below.
Temperature: 165~170℃ (329℉~338℉)
Time: 6 - 7 Minutes
(Test in your oven for accurate time)
Attach reversed printed image to tumbler with thermal tape
Place tumbler in heat shrink bag or silicone wrap
Set the convection oven at 165~170℃ (329℉~338℉) for 6 minutes. (Test to determine best timing!)
Afterwards, remove heat shrink bag / silicone wrap and paper immediately
Allow the tumbler to cool completely before use.
Caution: Tumbler is extremely hot when in the mug press, do not handle with bare hands.
Temperature and time settings are only a guide.
Handwash recommended, the rush power of the dishwasher might affect the lifetime of the vacuum insulation.
Please do not put in microwave oven or refrigerator.
Stainless Steel Tumbler DIY – Make Your Own Personalized Tumblers!