Oxy-hydrogen generator is also called brown gas generator, Acrylic Polishing Machine, Water Welding Machine, or HHO gas generator, which is able to separate clean soft water (H2O) into hydrogen and oxygen gases, using a small amount of electric power through water electrolysis. These gases are then mixed and delivered for wide use, such as welding, flame polishing, heating etc to replace use of LPG or other gas for fuel.
For welding, it featured low cost, welding fact, safety and low energy consumption.

1. Polishing and Sealing

a. Acrylic polishing
b. Glass tube sealing, quartz glass tube sealing-glass ampoule sealing
c. Ampoule bottles sealing
d. Water injection drawing sealing
e. Mould repair, quenching, crucible heating melting metal
f. Solar wafer processing, IC packaging

2. Welding and Brazing

a. Jewelry Industry:
For welding kinds of chain and string made of platinum, gold, silver, copper, stainless steel, etc.
For mending tiny sand holes on jewelry casting.
For jewelry repairing (reforming, casting, welding)
b. Electronic Industry:
For welding enameled wire or enameled wires and leading-out wires welding, electric motor brazing
For welding LED wafer
For flame-treating circuit board welding
For thermoelectric couple and platinum resistor leading wires welding
For musical instrument welding and brazing
For Air-conditioner & refrigerator brazing
c. Medical Industry:
For welding metal fittings and mending sand holes in dentistry
For no-carbon flame disinfection or glass seal
d. Laboratory:
Providing convenient, safe and clean oxyhydrogen flame
Quick and fine polishing for acryl (organic glass), solving problems that grinding wheel cannot achieve.
e. Others:
For welding or heat treating small metal parts
Automobile exhaust pipe brazing
Fishhook welding
Storage battery tinplate welding

APM-MS Series Water Hydrogen Flame Machine possesses the following leading key technologies:

Please choose the right HHO Water Welding Polishing Machine according to your actual requirement.

• Working Principle & Advantages of Water Oxyhydrogen Flame Machine
• How to Identify Different HHO Gas Water Hydrogen Welder Polisher
• How to Use HHO Gas Water Hydrogen Welder Polisher
• FAQ for APM-MS Series HHO Gas Water Hydrogen Welder Polisher

Tips:

• The longer sized flame signifies sufficient fire it gives, and the higher polishing efficiency it provides. This is suitable for larger area polishing with high efficiency. If the flame is thin and shorter, it means there is not enough fire, the flame will scan smaller area and leave tack and result low efficiency which is generally attributed by the small machine with less power and gas. Normally, the flame can reach 5 cm long that satisfies common requirements. For different work pieces, the user shall choose related machines with correspondent power and flame. As for the very thin acrylic, please don’t use bigger fire.
• According to the thick or thin edge, choose the nozzle type and fire it with the lighter.
• The flame tilts 45 degree toward the edge. Keep a proper distance to scan it evenly.
• According to the practical experience, you should adjust the flame’s scanning distance, speed or change the nozzle. After a few rounds, you can skillfully operate the machine.

Acrylic flame polishing: HHO gas acrylic flame polishing machine combusts the hydrogen gas and oxygen gas produced through water electrolysis as the fuel, and polishes the rough edges of the acrylic products with the high temperature generated by the flame. The polished edges with the high temperature will be glittery and bright.
The HHO gas acrylic flame polishing machine is suitable for all kinds of thick, thin and irregular shape (curved edge, edge angle, sunken face) acrylic (plexiglass) polishing. It can also solve something work like making crystal word in advertising industry that ordinary polishing machine cannot do.

APM-MS Series HHO Water Jewelry Welding Machine-Jewelry Tools and Supplies
When people buy jewelry, they mainly care about its fineness and craftwork. Welding technology is one of important process in the jewelry welding. And jewelry welding machine will be applied for the jewelry parts connection, jewelry inlaid, jewelry repair etc. HHO water jewelry welding machine is widely used in jewelry manufactures, stores or repairs. Today we mainly introduce you HHO oxy-hydrogen jewelry welding machine in the gold jewelry welding.

HHO oxyhydrogen jewelry welding machine’s features:

1. Hydrogen and oxygen is in the proportion of 2:1 after water electrolysis, which is also same combustion rate of hygrogen in oxygen gas. Compared with other gas fuels, it is not requied to add extra mixed oxygen gas when burning.
2. Oxyhydrogen gas is blue flame when burning. And there is no carbon dioxide emissions producing. Compared with oxygen acetylene, oxyhygrogen flame is concentrated, its burning fast, low flame temperature and the combustion heat value.
3. Water and some electric as fuels, it is low ciost, eco-friendly energy saving devices and safety, convenient for operation.

How to Operate the HHO Jewelry Welder Machine?
As usual, the left hands the HHO torch, the right hand holds the forceps, because the right hand is more flexible, it can better pick up the smaller material, and adjust position of the components to be welded. The flame temperature of different materials is different, and it is necessary to adjust the flame continuously to ensure the welding part not to be deformed or melted.
If you are looking for jewelry tools and supplier, HHO welding machines will be your first consideration.

It is just so easy!