Original Pinch Roller Assembly for Redsail RS-360C / RS-720C / RS-1120C / RS-1360C Vinyl Cutter
• With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability.
• The dual-spring set makes it easily to adjust the pressure, so there's an even force on each roller.
• Please measure your old Pinch Roller assembly before your purchase. Because if you find the size is wrong and want to return it back, you will afford the freight yourself.
• This item can be used in Redsail series vinyl plotter. And if the size is the same as your old one, you can also use it.
Load media /Load paper:
When you move the roller, you must lift the handle first; the right roller will not move, usually.
Lift the handle, the roller will lift 1-2mm, and then you can load your media.
Laying down the handle, you can press "UP" key (S+) or "DOWN" key (S-) continuously, the paper will roll to front or back; please confirm the paper must move straightly during the distance that you want to cut.
Adjust the speed and pressure, and then you can output the data to the plotter.
Packing Size: 180mm x 120mm x 105mm (7.1" x 4.7" x 4.1")
Gross Weight: 0.23kg(0.5lbs)