Is this product being sold elsewhere for a lower price?
Please fill in the short form below and we will try to work with our suppliers to match their price or provide an even better deal.
Price match requests are handled by professional sourcing staffs.
If the reported product is identical to the product from Sign-in-Global.us, and lower priced sources are found, prices on product pages will be updated within 48 hours (Mon-Fri) after price match is received.
Could not find the commodity information you want to buy on the website?
Let us know and we will make a deal of it.
All requests are reviewed within 48 hours (Mon-Fri).
The actual process of sourcing for the product might take longer. We can not necessarily always find you need products, but all your needs will be valued.
CALCA 10pcs 20oz Sublimation Blank White Skinny Tumbler Stainless Steel Insulated Water Bottle Double Wall Vacuum Travel Cup With Sealed Lid and StrawBuy It Now
Description: Material: Stainless Steel
Capacity: 20oz
Product Dimensions:
Height: 21.4cm (8.4") height
Lower diameter: 6.7cm (2.6")
Upper diameter: 7.1cm (2.8")
Upper diameter(including lid): 7.4cm (2.9")
Color: White
Quantity: 10pcs /carton
Weight: 3.8kgs (8.36lbs) /carton
Dimension: 41cm x 27cm x 17cm (16.1" x 10.6" x 6.7") /carton
Warm Tips:
1. Please allow 1-3mm tolerance due to manual measurement.
2. In order to make the tumbler cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible.
3. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry.
4. The uneven rotation temperature of the household oven will affect the transfer effect.
5. The bottom of the micro-cone Skinny Tumbler is a little small. It must be wrapped tightly with tape before transfer, and the shrink film will be sucked tightly, so there will be no problem.
Heating Temperature:
180℃ (356℉) & 60secs for Mug heat press machine;
165~170℃ (329℉~338℉) & 6mins for 3D Vacuum Heat Presses or Sublimation Oven
Remarks:
1. Remove the plastic insert lid and straw.
2. Design your image and print it out on sublimation paper with sublimation ink printer.
3. Tape imaged sublimation paper onto tumbler.
4. Place and center the product inside the shrink film / sleeve.
5. Use heat gun on low setting to shrink the wrap to the contour of the product. Begin with the side away from the transfer first. Ensure the wrap only encases the sides of the product leaving top and bottom open.
6. Repeat above steps for each item to include in production run.
7. Set the convection oven at 165~170℃ (329℉~338℉) for 6 minutes.
8. Ensure convection oven has reached temperature, place the tumblers in the preheated oven.
9. Close Convection oven
10. Once curing is done, open convection oven, and take the tumbler out of the oven.
Use gloves or heat resistant cloth to handle the hot tumbler.
11. Peel sublimation paper and shrink film off and leave it to cool off completely.
Caution: Tumbler is extremely hot when in the mug press, do not handle with bare hands
Note: Temperature and time settings are only a guide.